How-to · Site maps

How to make an event site map.

A site map does two jobs. For the city and the fire department, it is the plan they approve: where everything stands, how emergency crews get in and how people get out. For guests, it is how they find the stage, the food and the nearest toilet without asking anyone. Draw the first carefully; the second is a simpler copy of it.

Not legal or safety advice: the rules come from your city and its fire department. Here, the event map comes with Pro.

Before you draw

Gather what the plan depends on.

Get the city’s checklist

Many special events offices publish what a site plan must show. Some will not begin a review until the plan is in, treating the application as incomplete.

Walk the site

Note the gates, slopes, soft ground, overhead wires, trees, power and water points, hydrants and where trucks can turn. A satellite view helps; standing there shows what it misses.

Measure the space

Measure each area you plan to fill and the gaps between them. The size of the ground tells you what fits, and gives your venue or fire department a basis for setting a capacity.

Count what goes on it

Every tent, stage, stall, truck, generator and toilet, each with its size. Ask vendors for their footprint, including room behind the stall for stock and a vehicle.

The permit plan

Draw what reviewers check.

Structures, with sizes

Tents, stages, booths, food trucks and seating, each drawn at its real size. Many fire departments ask for the dimensions written on the plan.

Fire lanes and hydrants

Emergency access routes kept clear through the whole site, and every hydrant and fire department connection marked, with space left around it.

Exits and fencing

Each exit and the path to it, every fence and barricade, and the way the crowd leaves if the site has to be cleared.

Power and cooking

Generators, fuel and every cooking stall, especially fryers and open flames. Fire codes commonly keep generators and fryers a set distance from tents, often 20 feet.

Safety equipment

Each fire extinguisher by type and position, the first aid post, and the route an ambulance takes in.

Toilets, water and waste

Toilets, with the accessible units marked, handwashing and drinking water, bins, and where waste is collected.

How to draw it

Make it easy to read.

Close to scale, with measurements

Many cities accept a hand drawing, as long as it is legible, close to scale and has the measurements written in. Some want more, so ask first.

Name the surroundings

Name every street and area the event uses, including parking and production areas, so a reviewer who has never been there can follow it.

A key and clear labels

One symbol or colour for each kind of thing, explained in a key. Where the fire department asks, label each cooking stall with the vendor running it.

One current version

Date every version and send the newest to everyone together. A stall moved on paper but not in the vendor’s email ends up in the wrong spot when the trucks arrive.

The guest map

Give guests a simpler map.

Only what guests use

Stages, food, bars, toilets, water, first aid, the information desk and the exits. Leave fire lanes, fuel and back-of-house to the crew’s version.

Step-free routes

Mark accessible toilets, step-free paths, plus any viewing platforms and quiet spaces.

What happens where

Show what plays on each stage and when the food or the bar opens, so the map answers what is on as well as where.

Before and on the day

Publish it on the event’s website ahead of time so it is on every phone, and put a large printed copy at each entrance.

Using it

Put the map to work.

Brief the crew with it

Take area leads and volunteers round the site with the crew version, so anyone in a lanyard can point a guest the right way.

Give each vendor their spot

Where they set up, where they unload, and the time vehicles must be off the site.

Plan the build

Use it to decide what arrives first, where trucks unload, and which routes stay clear while everything goes up.

Mark what happened

Note where queues formed, where the ground turned to mud and which corner got crowded. Next year’s plan starts from those notes.

Questions

Event site maps, asked often.

What is an event site map?

A drawing of the grounds showing where everything stands: structures, stalls, exits, emergency routes, power, toilets, first aid. Officials approve the event from it, the crew builds from it, and a simpler version shows guests where to go.

Does an event site plan have to be drawn to scale?

Usually close to scale. Many cities accept a legible hand drawing with the measurements written in, while others want it properly to scale. Your special events office will tell you what it accepts.

What does the fire department look for on a site plan?

Mostly how emergency crews get in and how people get out: clear fire lanes, hydrants, exits, and the distance between tents and anything hot, like generators and cooking. Many also want each fire extinguisher shown.

How far should generators be from tents?

Each fire department sets its own figure. Several we read ask for 20 feet, and one also keeps spare fuel 50 feet from tents and cooking. Use the figure your own fire code gives.

What should a festival map for guests include?

Stages and set times, food and drink, toilets with the accessible ones marked, water, first aid, the information desk, the exits and the step-free routes. Keep it simpler than the plan you sent the city.

When should I send the site plan?

With your permit application, as early as the city allows: deadlines vary, and one fire department we read asks for ninety days. If it is your first year, one city we read asks for a rough plan with the application, so it can set fees and requirements.

Maps for crew and guests

Pins guests can tap, zones you can measure.

On EventsMagic, pin each stage, gate, stall, toilet, first aid post and water station on a map with a satellite view, every pin showing its kind by icon, with a description and opening hours. Draw zones such as parking, camping or a vendor village and see the area and the length of every edge as you go, a head start on the measurements your city asks for. Link each session to its stage, and on the event’s page guests tap a pin to see what it is, when it opens and what plays there. On Pro.